22' x 32' T-REX Saltbox Barn
TR8G2232
$300.00
This 22' x 32' Barn uses T-Rex Connectors making it easy to cut and assemble with no complicated joinery. This design of this barn offers both beauty and functionality. It features a large garage door opening in the center section on the front. The inside of that space is open up to the rafters, while the space on each end offers a storage loft above each. With the Saltbox's elongated rear rafters, it creates an additional 6' of usable space along the entirety of the building's length. This is done all while maintaing plenty of headroom, with the rear plate beam sitting at just above 7'. The 32-page plan will provide you with everthing you need including a 3D rendering, elevations, material lists, post layout, plate beam layout, all wall layouts, rafter layout, fastening details, and all single beam drawings. The frame is made up using 8x8 posts and tie beams, 8x12 plate beams and girders, 4x10 rafters, 4x8 joists, 4x8 collar ties, 6x8 door bucks, 4x4 siding nailers, 3x8 sill plate covers, and 2x4 fly rafters. Use these plans to build that barn you have always wanted, and get started today!
Frame Specifications:
- Size: 22' x 32'
- Joinery: T-Rex Connectors
- Posts: 8x8
- Plate Beams: 8x12
- Tie Beams: 8x8
- Joists: 4x8
- Rafters: 4x10
- Knee Braces: 4x6
- Siding Nailers: 4x4
- Door Bucks: 6x8
- Fly Rafters: 2x4
- Sill Plate Covers: 3x8
- Roof: 8 Pitch
- 1st Floor Wall Height: Main: 11' ; Rear: 7'
- Rafter Overhang: 1'
Plan Specifications:
- Rendering
- Frame Elevations
- Material List
- Post Layout
- Plate Beam Layout
- Wall Layouts
- Rafter Layout
- Single Beam Drawings
- Fastening Details
Quantity
Timber Frame Kit Package
The CNC Pre-Cut Frame for this Barn starts at $26,000. Contact us for more information.
Delivery
Upon check out you will receive a download link immediately that will last for 30 days. Please save your file and remember to print your new plan pages according to page size noted on drawings.
Building Disclaimer
The frame design shown has not been engineered and is only intended as a general outline. It is the sole responsibility of the homeowner and/or contractor to determine if local or state code requires an engineer’s stamp on plans before erection. Team Timber, LLC does not design to a specific area and for that matter will not hold any reasonability or warranty plans if plans do not satisfy the requirements of local and/or state building codes.
Copyright Policy
The buyer agrees that when purchasing a plan, they may only build one structure or building per plan bought. They cannot reproduce the plan or any part of it without written consent of Team Timber.
Mortise & Tenon Joinery Conversion
Contact us to get more information and pricing on converting this plan to use Mortise & Tenon Joinery.
